Mag tatanong lang po sana ako regarding this IDEA wala po kasi akong makita about sa ganitong topic, sana matulungan niyo po ako sa experiment ko if possible po ba ito, i want to learn more about routing a system
Eto po yung sample diagram na gusto ko sanang manyari if possible ba, to run smooth in a small network system:
This image is hidden for guests.
Please log in or register to see it.
pasensya na po sa diagram ni layout ko lang po sa paint,
1. First question po, assuming my ISP MODEM is having 100 mbps per lan connection and having same gateway na 192.168.1.1 and from the diagram above connecting to two(2) different router with same segment IP na 192.168.1.2 and 192.168.1.3 connecting to both router WAN, the question is dapat ba yung router 1 and router 2 next to isp modem will be set to bridge mode or route mode din? and why?
NOTE:
ISP MODEM are not in BRIDGE MODE but specifically naka route mode po assuming na they give equal bandwidth na 100mbps per lan connection
2. 2nd question po, kung mapapansin po sa diagram router 1 and router 2 are connecting in a two(2) different switches means the 100mbps will supply per switches with 24 ports so bahala na si switch na idevide ang dalawang 100mbps na bandwidth sa mga pc na nakaconecta sa bawat switches the question is ok lang ba na in same segment ip ang lahat na icconect in both different switches?
3. 3rd question po, looking from the diagram, eto po yung critical part kung yung ISP modem ay nagsupply ng tig 100mbps per lan sa 2 router then si router 1 and router 2 ay ibinigay ang tig 100mbps per switches, wala bang magiging conflict kung ililink ko ang two different switches para magkita lahat?
NOTE:
The main purpose is I have ONE(1) DISKESS SERVER na need supplyan ng data, assuming na 40 clients and 20 clients per switch ang plan na dapat magkikita kita in a whole network system also in a different PC SERVER na ang ihahandle naman ay ang timer na dapat makita rin ang lahat ng PC connected into ONE(1) whole network system.
Sa mga nabasa ko po dito sa ulop in most cases 2 different ISP MODEM na pagsasamahin and linked to one router then supply to many switches and clients, In my case baligtad naman according to diagram, 1 ISP that supply different bandwitdh per lan connection naman na pagsasamahin into single network system using addons na TWO(2) routers lang....
Sana po matulungan niyo po ako sa idea na to,
Kung mali po yung topic na to na gumawa po ng bago, pakisama na lang po sa tamang thread, hindi ko po kasi alam kung saan ko po ilalagay , thanks in advance po and God bless us all....