TOPIC: Pancafe Pro Client Theres NOway to open ClientPC??

Pancafe Pro Clent cant open diko alam panu ang gagwin para maoopen ung client.
CLIENT PC1
SERVER PC2
Pancafe Client/Server
Shadow defender with key

So eto ang nangyari. pls sana maintindihan nyu ung pgkakasunod.
1. nginstall aku sa (CLIENT PC1) ng pancafe pro for client. and then
2. naginstall ako sa (SERVER PC2) ng pancafe pro for server.
(wala pa aku binabago s server SETTINGS about (client settings) ang nagako lng eh ung mgtry na mgstart session at close session s (CLIENT PC1) which is ok naman working na cya.

So Here is the catch: SOMETHING I SHOULD NOT DO

3. ngopen session ako ky (CLIENT PC1) kc magiinstal ako ng Shadow defender pero sa diko maisip n dahilan

---

> dinisable ko MUNA c internet ni (CLient PC1) para not connected s internet kc mglalagay ako ng key ni shadow defender. disable internet before ko ininstall c shadow defender.

4 after install at HABANG naka disable pdin c iinternet ni (CLIENT PC1)
Naisip ko pumunta sa SERVER

5. eto na nasa SERVER PC2 ako at sa settings ng pancafe COMPUTER CLIENT RESTRICTION i HIDE the DRIVE(C) and then select all the ff:

ALL OF THESE ARE CHECKED including HIDE drive (c) were all of my programs are installed.

Disable access to Task Manager
Disable access to Registry Editor
Disable Command Prompt
Disable Run Command
Disable Access to Control Pannel
Disable Add Printer
Disable Remove Printer
Hide Windows Loagout Button
Disable Fast User Switch
Hide Windows Shutdown Button
Enable File/Folder Protection

then i get back to CLIENT PC1 and continue set up shadow defender and turned it OFF which also saved the clien pc internet disabled. i restart the client. and then booom!!
no ctrl alt delete and it is not detected by my server thats why i cant start session to open from stanby mode.

what i already did.
1.check internet cable ang plug it correctly from router -switch cable/switch-client cable.
2. restart both pc. still not detected.
3. start session. still not working because its not detected in server. the CLIENT PC1 still on the pancafe pro standby logo not affected by server command.
4 there is no ctrl alt delete coz its disable which give me no option to get to my desktop or stopped pancafe client.

5 THIS IS SOMETHING F*** UP.
i try to open in safemode to UNINSTALL my pancafe client so i can get back to my desktop.
but in safe mode still i cant access ctrl panel no drive c no command no ctrl alt delete no pancafe pro icon. no pancafe pro folder on start menu no pancafe pro icon. which means. I CANT ACCESS PANCAFE PRO TO UNINSTALL IT. it still applies restriction even when im in safe mode.

there is icon of shadow defender in desktop. i open its folder using right click locate icon and able to un install it in safe mode. but when i change folder path manually to locate drive c or pancafe folder, no luck its still restricted and theres no way i can acces the pancafe pro program/folder or icon.

in the end. when ever i restart pc it ended up in pancafe pro standby screen where u cant do anything unless you can start session to open pc by server which unfortunately server cant detect client pc1.

i dont want to reinstall windows.
PLEASE HELP ANY HELP WOULD BE MUCH APPRECIATED.
THANK YOU! GODBLESS!

simple lang po ung ginawa mong problema tinago mo ung drive c mo... buksan mopo ulit ung restriction at i unhide mo yung drive c sa client pc1.. hindi naman kailangan i hide ung drive c kasi jan nakalagay ung windows folder mo...

Hello po. una po sa lahat Maraming salamat sa time pagreply nyo skin.

aun po ntry ko n po un nkaopen ung server at client pc1 and then connected ng maaus mga internet cable. pero hndi pdin po detected c client1 kht nka on at stanby n s pancafe pro c client...
ang ginawa ko po kht hndi detected niremove ko po lahat ung restriction s pc client n un (tinangal mga restriction) tapos restart po pero dhil hndi po detected kht ilang beses ang itry at mghnty ayaw pdin macontrol c pc kya manual ko n po nirestart.
ung clientpc1 po tinanggal ko nlng po s saksakan pra mrestart.
then aun po wla pdin ngbago restricted pdin lhat at nka stanby pdin agad s pancafe pro logo c client.

any other suggestion po or my namiss po akong gawin? pls msg lng po ssgut ako agad pag online ako.

windows xp po pla gamit ko s client.
SALAMAT!

first sa bios get mac address
access your router and force ip setting on that mac address like 192.168.0.101-->(PC01 MAC ADDRESS)
sa server palitan mo setting ni pc1 sa IP na naassign mo

make sure tama magkakakabit ng network mo at tama ang setting ng server at router mo..
pag ganyan kasi either no connection, wrong subnet with server, or no dhcp sa network kaya hindi mag kita yung dalawang computer..

baka sa firewall....

Salamat po sa reply mga Sir.
bale ng try po ako sa Safemode with command prompt kc baka pde mgtype ng command pra s enable network adapter o kng anu man ang pde magawa pero disabled din cya.

so eto po un Sir frozzen-eyes:
i cant access firewall even if iwant to or even if ivneed to,because of these:

In Pancafe Pro Server:
ALL OF THESE ARE CHECKED including HIDE drive (c) were all of my programs are installed.

Disable access to Task Manager
Disable access to Registry Editor
Disable Command Prompt
Disable Run Command
Disable Access to Control Pannel
Disable Add Printer
Disable Remove Printer
Hide Windows Loagout Button
Disable Fast User Switch
Hide Windows Shutdown Button
Enable File/Folder Protection

dku lahat maacess lahat yan dhil nirestrict ko ky server before restart c client pc1.
And that also applies in safemode which means dko din po maacces.

** one thing n iniisip ko ay dahil sa dinisable ko ung network adapter ni client pc1 bago ko nirestart, itmeans every restart its will always be disabled. and i cant access that because of assigned restriction i cant get to my desktop.

any other suggestion? Salamat sa reply sir.

++++++++++++++++++++++++++++++++++++++++++++++++++++++

hi sir gmsnatcher:
that being said about network adaptor disabled pde pdin po ba ung suggestion nyo or need to enable network adapter first o kaya npo ng bios un?

ang pagkaintindi ko po,pls correct me if im wrong or missed something.

1. set ko sa BIOS ung CLIENT MAC ADDRESS to 192.168.0.101
2. then s server ung client pc1 setting is same as MAC ADDRESS to 192.168.0.101?

ang tanung qlng po saan po un s bios? tnx

Thanks po sa reply.

ano po mangyari kung allow to sa firewall

Nasubukan mo na bang mag-login as Admin sa client PC mo? Para naman macheck mo settings sa client PC at hindi lang sa server PC. Sorry ha, ang pagka-gets ko kasi sa issue mo is naka-lock na lang si client PC mo at di madetect ni server.

naka static IP ba both server and client? naka lagay ba yung server IP sa pancafe client settings? ^_^