TOPIC: Repair your own printer discussion

Epson L360.

epson l4150 ganda printout kaso...

pano ba maayos dun sa pasukan ng papel a4 na lang kasya wala namang nakaipit.
eto palagay ko dahilan kung bakit may border space siya sa left side ng photo paper kahit naka-borderless setting

Sir yung printer ko hp2545 ang problema kinakainin yung paper sa umpisa pero ayaw magtuloy

mga sir ano pong magandang ink para sa brother MFC-J2330DW yong cyan niya kasi nagka-clog polaris gamit kong ink.

PisonetxShop wrote: di kaya sa dilaw sir kasi pag nag pprint check ako laging kulang yung yellow eh?

baka na dutertards ang printer mo

Brother dcp-t700w yung sakin. Okay yung quality at speed niya. Problema ko lang madalas yung paper jam at hindi niya kaya kumain ng photo paper. Bakit ba kase nauso yung paper tray. Okay na yung nasa likod e.

Mga ka-ulop baka may ganito kayong problema na nabigyan ng solution...

Printer: Canon MP287

pasteboard.co/IHcUqAf.jpg

My dudes hingi naman ng advice:

>Bought Canon MG2570S
>tested to make sure everything was working as intended
>Print quality is 11/10 would buy again
>my dumbass tried converting this bad boi sa ciss
>poked and drilled a few holes here and there sa body ng printer pero ok na ung hose saka ink flow
>tried testing print quality after
>suddenly may lines na ung color, ung black OK pa din
>duda ko kako baka kulang lng sa prime
>prinime ko ulit ng priming tool
>noticed green lang ung color combination na sinusuka ni color (CL 746s cartridge pala to)
>decided to F it gonna pry this bad boi open
> pag tanggal ko dun sa sponge kita ko butas ung silver na cloth na pang filter sa ink sa ilalim dun kay magenta
> tried blocking it with paper towel
>put it back together
>priming the freakin thing still gives me green ink

on a scale of you still good-bili na ng bago how F#$ked am I?

Hallussion wrote: My dudes hingi naman ng advice:

>Bought Canon MG2570S
>tested to make sure everything was working as intended
>Print quality is 11/10 would buy again
>my dumbass tried converting this bad boi sa ciss
>poked and drilled a few holes here and there sa body ng printer pero ok na ung hose saka ink flow
>tried testing print quality after
>suddenly may lines na ung color, ung black OK pa din
>duda ko kako baka kulang lng sa prime
>prinime ko ulit ng priming tool
>noticed green lang ung color combination na sinusuka ni color (CL 746s cartridge pala to)
>decided to F it gonna pry this bad boi open
> pag tanggal ko dun sa sponge kita ko butas ung silver na cloth na pang filter sa ink sa ilalim dun kay magenta
> tried blocking it with paper towel
>put it back together
>priming the freakin thing still gives me green ink

on a scale of you still good-bili na ng bago how F#$ked am I?

Kung sure kang cartridge nasira mo, yan naman yung pinapalitan kapag bumili ka ng genuine na ink.

Sure ako ung color cartridge ko nasira ko kasi kitang kita ung butas na filter sa ilalim nung inopen ko sya, meron kayang pwedeng gawing stopgap dito? ok pa nman kahit papano ng print ng ibang colors wag lang pure red.